Dell™ Latitude™ D400 Service Manual

Download Dell™ Latitude™ D400 Service/Repair Manual in PDF file through the following options:

Dell Latitude D400 Service Manual from DepositFiles  
(USA / Europe / Russia / Germany / Ukraine / Kazakhstan)


Dell Latitude D400 Service Manual from Ziddu
(All other countries)

The D400 Service Manual is only for certified service technicians, who should perform repairs on your computer.  If you want only to explore specific functions like removing/installing hard drives or installing memory module [upgrading hard disk drive or memory/RAM], you must read from the beginning of this service manual. Take note that damage due to servicing that is not authorized by Dell is not covered by your warranty.

Other Downloads:

1) System Information (Dell Latitude D400) [alternate link: System Info D400]

2) User Guide (Dell Latitude D400) [alternate link: User Guide D400]

Browse Dell Latitude D400 Parts and Accessories

D400 Service Manual covers the following:

I.     What needs to be done before starting to service your Dell Latitude D400

• How to Prepare Working Inside Your Dell Latitude D400
• Recommended Tools for the procedures in this D400 Service Manual
• Knowing Your D400 Computer Orientation
• D400 Screw Identification Chart

II.    When and How to Use the Dell Diagnostics

• When to use the Dell Diagnostics
• Features of the Dell Diagnostics
• Starting the Dell Diagnostics

III.   Know the Dell Latitude D400 System Components

IV.   How to Remove/Install Keyboard for Dell Latitude D400

V.    How to Install/Replace Memory for Dell Latitude D400

VI.   How to Remove/Replace Mini PCI Card for Dell Latitude D400

VII.  How to Replace/Install Modem for Dell Latitude D400

VIII. How to Remove/Install the Hard Drive for Dell Latitude D400

IX.    How to Remove/Install the Docking Doors for Dell Latitude D400

X.     How to Replace/Install the Bluetooth Module for Dell Latitude D400

XI.    How to Remove/Replace the Display Assembly / How to Replace the Display Latch

XII.   How to Remove/Replace the Palm Rest for Dell Latitude D400

XIII.  How to Remove/Replace the Cooling Fan for Dell Latitude D400

XIV.  How to Remove/Replace the Touch Pad for Dell Latitude D400

XV.   How to Remove/Replace the System Board for Dell Latitude D400

XVI.  How to Remove/Replace the Reserve Battery for Dell Latitude D400

XVII. How to Flash the Bios for Dell Latitude D400

XVIII. How to Replace the Speakers for Dell Latitude D400

XIX.   How to Remove the Battery Latch for Dell Latitude D400

XX.    Pin Assignments for I/O Connectors (USB/Video/Serial/Dell D/Bay Connectors)

XXI.   Mini Recommended Spares List for Dell Latitude D400

How to Insert a Simple HTML Coding for an Image That Links to a Website?

To insert a simple HTML Coding for an image that links to a website (when the image/photo is clicked it directs to another website or another page of your site), the following is a general pattern:

1) [ YOUR SITE / LANDING PAGE URL HERE ] will be your blog's URL/address; when people click on the image they will be directed or brought to your site.

2) [ target="_blank" ] will open a new window to your site when the photo is clicked. Change 'blank' to 'top' if you want them to open in the same window.

3) [ ALTERNATE TEXT ] is the text that will appear in case the photo URL is not loading yet, because sometimes photos do not load always due to bandwidth reasons.. so, think of a text that will represent the photo or your site (usually it's the website name).

4) [ IMAGE URL HERE ] is the file address of your image.  Your image/photo should have been uploaded in image hosting sites like flickr, photobucket, picasaweb.

5) [width="420" height="137"] adjust your image or photo size by changing the width and height values; if you want to use your original uploaded image size, just remove the whole code [width="420" height="137"].

Notes:

a. if you are inserting a photo/image from your computer to your blog post... after inserting the photo/image, go to "Edit HTML" tab and change the URL next to the code href=" , as in Step 1 above.

b. if you are inserting a photo/image in the sidebars or top/bottom bars of your blog specifically in blogger, you can either insert through the "Layout", then "Add a Gadget", choose "Picture" and enter the data asked; or choose "Java/HTML" gadget and enter the HTML code as in the pattern above.

A sample image/photo HTML coding below directs users to the site, "You're Beautiful Episodes", when the image is clicked.  Notice the values/parameters I entered in blue text. The original image size is 500x400 pixels, but I made it 50% smaller, maintaining the WxH ratio as to not distort the image.

 Korean TV Series, "You're Beautiful" Recommended Book Reference for HTML Coding: 

How to Stop Auto Posting / Publishing of Applications Recent Activity Feed in Your Facebook News/Live Feed

To stop auto posting/publishing Facebook applications recent activity feed to your News Feeds, just follow the steps below:

1) Click the Account drop down menu located at the top right area (as per new FB Home Page, updated February 2010), then, go to Applications Settings, as shown below.

*Application Settings - Recently Used page (as in the snapshot below) will then be loaded, listing all the applications you use in Facebook (example: Farmville, World Cafe, Mafia Wars, etc.).  The application with the "X" button at the right column are those applications that you've previous approved to be bookmarked and have access to your data; clicking the "X" button will stop the access to your Facebook data and the application will be removed from your profile, bookmarks, and Applications Page (in the list below).

2) In the Applications Page, click Edit Settings of the application you want to stop posting /publishing recent activity feeds.  The Edit Application Settings pop-up window will then show with the Bookmark Tab as default.  You can also uncheck that option if you like to remove the application from your bookmark icons.

3) In the Edit Application Setting pop-up window (as shown below), click the Additional Permissions tab, then UNCHECK "Publish to streams".  That action will then stop auto posting/publishing of a Facebook application's recent activity feed to your News/Live Feed.

Hope this simple blog has helped you.  Visit this site again, or refer to friends.  Thanks for the visit!

This Article's Sponsors:

How to Uninstall Veoh Web Player

To uninstall the Veoh Web Player cannot be done in the Control Panel.  I got this method from Yahoo Answers when I tried to uninstall my Veoh Web Player:

1) Got to C:\Program Files\Veoh Networks\VeohWebPlayer [you can copy this addres and paste to your Windows Explorer search bar.]
2) Double-click uninst.exe file and follow the instructions.
3) Restart your PC to complete the uninstall process.

For other related veoh web player application uninstall actions, refer to:
Uninstall Veoh Web Plyer (Yahoo Answers)
Uninstall the Veoh Web Player on Mac (veoh.com FAQ)
Install Veoh Web Player (veoh.com)

This Article's Sponsors: